Geared drilling machine with thread tapping unit and electrically controlled spindle sleeve feed DH 35V with continuously adjustable speed control.
Facts that impress in terms of quality, performance and price
- Dirt/water-resistant, easy-to-clean membrane keyboard
- 24 V DC electronics
- Electrical spindle sleeve feed
- Drilling depth stop
- Low-maintenance gear unit running in a closed oil sump
- Thread tapping device.
- Machine lamp integrated in drilling head
- Main switch
- Generously dimensioned, height adjustable protective screen with safety switch for greatest possible user protection
- Generously dimensioned, solid drilling table, precision workmanship, with 2 diagonal T-slots and recirculating coolant duct, strong reinforcing ribs on rear side and double clamping
- Coolant unit with coolant tank integrated into base plate
- Chip filter removes coarse components from the coolant
- Robust, thick-walled cast-iron column for excellent force absorption
- Solid base plate with parallel T-slots, precision surface finish
- Optional footswitch available for toggling between right-handed/left-handed run and for thread tapping (Article no. 3050032)
OPTIdrill DH 35V
- Continuously adjustable speed control
- Pitch deactivation
- Easily readable digital display
- Digitally adjustable drilling and thread depth
- Digital zero point adjustable
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
المواصفات
| Info | |
|---|---|
| الماركة | OPTIMUM |
| Dimensions and weights | |
|---|---|
| الوزن | 365 Kg |
| Column diameter | 115 mm |
| Length x width x height | 860 x 474 x 2175 mm |
| Electrical Data | |
|---|---|
| Electrical connection | 400 V / 3 Ph ~50 Hz |
| Motor output | 2.2 kW |
| Drilling performance | |
|---|---|
| Drilling performance in steel | Ø 35 mm |
| Continuous drilling performance steel | Ø 26 mm |
| Thread tapping steel | M 24 |
| Spindle | |
|---|---|
| Spindle sleeve stroke | 125 mm |
| Spindle holder | MT 4 |
| Throat | 285 mm |
| Spindle sleeve feed | 3 speeds: 0.05-0.15 mm/rev |
| Rotational speeds | |
|---|---|
| Spindle speeds | 30 - 2 950 rpm |
| Number of speeds | 4 speeds, electronically controlled |
| Drilling table | |
|---|---|
| Drilling table workspace L x W | 400 x 420 mm |
| Drill table rotation/lateral pivot | 360° / ± 90° |
| Clearance spindle - drilling table | 65 - 800 mm |
| Drilling Table T-slot size/distance/amount | 14 mm / 150 mm / 2 |
| Machine base | |
|---|---|
| Clearance spindle - machine base | max. 1 217 mm |